DCISoft 1.25 Download – Delta PLC Ethernet communication software

Delta DCISoft Download v1.25 – DCISoft is Ethernet communication software for Delta PLC. In this article, 365EVN guides you to make the ethernet communication between PLC and PC. You can search, and change the PLC IP address on Delta DCISoft.

Download DCISoft 1.24 & 1.25

Download Delta DCISoft 1.24 & DCISoft 1.25 the latest version (until now) at the end of the post.

• DCISoft supported OS: Windows 7/8/10 (32 bits and 64 bits)
• Delta DCISoft supported device:
  • AH series Ethernet/serial communication modules
  • AS Series SCM module,
  • DVP series built-in Ethernet PLCs
  • DVP series Ethernet/serial communication modules
  • IFD series Ethernet modules

If you can not watch the video above, please check another link in my Video Area (V0061) or give feedback to me via WhatsApp, Email, or Message. Thank you!

Delta PLC Ethernet communication PC via DCISoft

Step 1: Set the PC IP address

Please refer to the previous article on 365evn to do it: Config The IP Address On The Computer Before Download HMI Program

Step 2: On Delta DCISoft 1.24

• Open “Delta DCISoft”. Click “Tools” -> “Communication setting”
• Set up the connection: Communication type -> Ethernet and select your ethernet card. Click “OK”.

• Click the “Search” icon and wait for the software to search the device. After DCISoft finished searching the PLC IP address will show below

Step 3: Change the Delta PLC IP address

• Double-click on the PLC icon. Click on the “Basic” tab
• Set the IP address, netmask, and gateway in the “Network setup” section

• Click “Apply” -> “OK” to finish. Note: stop the PLC before saving the setting.

Refer to the video below

DCISoft 1.24 – Delta PLC Ethernet communication software guide

If you can not watch the video above, please check another link in my Video Area (V0065) or give feedback to me via WhatsApp, Email, or Message. Thank you!

Download DCISoft – The latest version

• DCISoft v1.24 – Delta PLC Ethernet communication software: Link
• New version: DCISoft v1.25
• All guide videos about PLC HMI, VFD, and Servo programming by 365evn (Video area): Link

Summary

Delta DCISoft is a small and helpful tool for Delta PLC-supported ethernet ports. With DCISoft 1.24 and 1.25 we can easy to search and change the IP address for Delta PLC.

If you have any questions please comment below or on our Facebook group.

See you in the next post!

-365evn.com, Refer Delta–